{"title":"Suspension","description":"\u003cp\u003eLift kits, leveling kits, shocks, air springs and suspension parts for trucks, Jeeps and SUVs. Need it installed? We do installs at our Visalia, CA shop.\u003c\/p\u003e","products":[{"product_id":"rough-country-ride-control-kit-mercedes-sprinter-2019-2026-85006","title":"Rough Country Ride Control Kit | Mercedes Sprinter (2019-2026)","description":"\u003cp\u003eRestore Comfort. Regain Control: Give your Mercedes Sprinter the confidence-inspiring ride it deserves with Rough Country's Vertex Ride Control Kit. Whether your van serves as a work vehicle, camper conversion, overland rig, or daily driver, this system is engineered to restore lost ride height, reduce rear-end sag, and provide the additional suspension support needed for heavier loads. The result is a more level stance, improved vehicle control, and a smoother driving experience wherever your travels take you. Engineered for Superior Ride Quality: The Vertex Ride Control Kit is designed to improve suspension performance in real-world driving conditions. Featuring 8-stage adjustable front struts and 16-stage adjustable rear coilovers, you can fine-tune damping characteristics to match your driving style, cargo load, or adventure setup. By delivering more effective damping across both small road imperfections and larger impacts, it helps reduce harshness while maintaining excellent stability and control. You'll notice improved handling over rough pavement, expansion joints, and uneven roads, along with greater confidence when cornering, changing lanes, or driving in windy conditions. The added suspension support also helps resist bottoming out when carrying cargo, equipment, or camping gear. Built for Everyday Adventures: From long highway trips to demanding job sites and camper adventures, this system helps create a more composed, controlled driving experience. Improved body control minimizes excessive bouncing and unwanted suspension movement, while enhanced cornering stability and reduced crosswind sway inspire greater driver confidence. The wide range of suspension adjustability allows you to dial in the ideal balance of comfort and control, whether your Sprinter is unloaded, fully equipped for overlanding, or carrying heavy cargo. You'll enjoy a smoother, more predictable ride in virtually any driving condition. Straightforward Installation: Designed as a direct-fit upgrade, the Vertex Ride Control Kit installs using factory mounting locations with only minor drilling required. Installation can be completed with standard hand tools, making it easy to improve your Sprinter's ride and handling. 3-Year Warranty: Backed by Rough Country's 3-Year Limited Warranty, the Vertex Ride Control Kit is built to provide dependable performance and lasting reliability, giving you confidence on every journey.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores Ride Height \u0026amp; Reduces Sag:\u003c\/strong\u003e Helps bring your Sprinter back to its proper ride height by reducing rear-end sag caused by heavy cargo, overlanding equipment, or camper conversions, improving both appearance and suspension performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Stage Adjustable Front Struts:\u003c\/strong\u003e Fine-tune front suspension performance with eight levels of damping adjustment, allowing you to dial in the ideal balance of ride comfort, handling, and control for your driving style and vehicle setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-Stage Adjustable Rear Coilovers:\u003c\/strong\u003e Customize rear ride quality with 16 levels of adjustable damping to optimize comfort, load support, and stability whether your Sprinter is unloaded, carrying cargo, or outfitted for overland and camper adventures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stability \u0026amp; Driver Confidence:\u003c\/strong\u003e Improves cornering stability while helping minimize body roll and crosswind sway, delivering a more controlled, confidence-inspiring driving experience whether on the highway or winding roads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth, Controlled Ride Quality:\u003c\/strong\u003e Provides more effective damping over both small road imperfections and larger impacts, helping reduce harshness while maintaining excellent control and comfort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Handling on Rough Roads:\u003c\/strong\u003e Enhances suspension control over uneven pavement, expansion joints, and broken roads for a more planted feel with reduced bouncing and improved steering response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Bottom-Out Resistance:\u003c\/strong\u003e Offers additional suspension support to help prevent harsh bottoming out under heavy loads or during large suspension impacts, protecting both passengers and cargo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e Designed as a direct bolt-on upgrade that installs using factory mounting locations with only minor drilling required, making installation straightforward while maintaining a secure, factory-style fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(2) Vertex Struts\u003c\/li\u003e\n\u003cli\u003e(2) Vertex Coilovers Mounting Brackets Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2019-2026 Mercedes-Benz Sprinter 2500 (4WD\/AWD)\u003c\/li\u003e\n\u003cli\u003e2019-2026 Mercedes-Benz Sprinter 3500XD (2WD\/4WD\/AWD)\u003c\/li\u003e\n\u003cli\u003e2019-2022 Mercedes-Benz Sprinter 3500 (4WD)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstall time:\u003c\/strong\u003e 4-6 hours\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Does NOT provide lift. Minor drilling required. For ease of installation a nutsert tool is recommended 10583. For tips on how to install a nutsert please watch this video here!\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671148101745,"sku":"85006","price":3749.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/23-26_mercedes_sprinter_van_vertex_kit_-_85006.jpg?v=1791959279"},{"product_id":"rough-country-2-inch-lift-kit-w-o-air-suspension-jeep-grand-cherokee-l-2wd-4wd-2021-2026-68400","title":"Rough Country 2 Inch Lift Kit | W\/O Air Suspension | Jeep Grand Cherokee L 2WD\/4WD (2021-2026)","description":"\u003cp\u003eAchieve a More Aggressive Stance: Transform the look of your Jeep Grand Cherokee L with Rough Country's 2-Inch Lift Kit. Designed to raise the front of the vehicle and eliminate the factory rake, this kit delivers a leveled stance that enhances your SUV's appearance while maintaining the refined styling Jeep owners love. More Clearance for Larger Tires: Gain the extra clearance needed to run larger tires and wheels with confidence. Whether you're looking for a more commanding presence on the road or additional capability on the trail, this lift kit provides the room necessary for a more aggressive setup without compromising everyday drivability. Engineered for Everyday Comfort: Unlike lifts that sacrifice ride quality for height, this system is engineered to maintain factory-like comfort and handling characteristics. Enjoy the added ground clearance and improved appearance while preserving the smooth ride and confident road manners of your Grand Cherokee L. Complete Front-to-Rear Lift Solution: This comprehensive kit includes front strut spacers, pre-load spacers, rear shock sleeves, and rear coil spacers to provide a properly balanced lift across the entire vehicle. Each component is designed to work together for reliable performance, consistent ride height, and a clean, integrated appearance. Straightforward Installation: Featuring a bolt-on design, this lift kit installs without cutting or drilling, making it an excellent upgrade for enthusiasts looking to enhance their vehicle with minimal modification. Installation requires disassembly of the factory front struts, and a spring compressor is required to safely complete the installation process.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifted, Level Stance:\u003c\/strong\u003e Raises the front of your Grand Cherokee L by 2 inches to eliminate factory rake and deliver a more aggressive, leveled appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClears Larger Tires:\u003c\/strong\u003e Provides additional tire clearance, allowing you to run larger, more aggressive tires for enhanced off-road capability and a bolder look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains Ride Quality:\u003c\/strong\u003e Engineered to provide increased ride height while preserving factory-like comfort and handling characteristics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e Designed for a straightforward bolt-on installation with no cutting or drilling required, making it easy to achieve increased ride height with minimal modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Suspension Solution:\u003c\/strong\u003e Includes front strut spacers, pre-load spacers, rear shock sleeves, and rear coil spacers for a properly balanced lift from front to rear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStrut Spacers Pre Load Spacers\u003c\/li\u003e\n\u003cli\u003eCoil Spacers Shock Spacers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2021-2026 Jeep Grand Cherokee L (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstall time:\u003c\/strong\u003e 3-4 hours\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e A strut\/spring compressor will be required to complete the installation of this kit. Does NOT fit models equipped with the factory Quadra-Lift Air Suspension system.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671148167281,"sku":"68400","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/21-26_grand_cherokee_l_2in_lift_-_68400.jpg?v=1791959282"},{"product_id":"rough-country-3-5-inch-lift-kit-m1-rear-mono-leaf-chevy-silverado-1500-22-24-28240red","title":"Rough Country 3.5 Inch Lift Kit | M1 | Rear Mono Leaf | Chevy Silverado 1500 (22-24)","description":"\u003cp\u003eExplore New Heights: GM's fourth-generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 3.5-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's 3.5in lift features a set of forged aluminum upper control arms to provide the correct suspension geometry in our most durable control arm to date! This perfect-height lift is a great choice for anyone who wants more than a simple level but doesn't quite want the full height of a 6-inch option. This kit lifts and levels the front of the vehicle with the rear, offering enough increased ground clearance to run up to 295\/55R20 tires with an improved, aggressive look. We didn't want to limit you to one standard kit. Rough Country's 3.5-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: Requiring the use of a strut compressor to install, an estimated timeframe of 5-6 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 3.5\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevels Your Ride:\u003c\/strong\u003e Lifts and levels the front with the rear for a balanced stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Lift:\u003c\/strong\u003e Provides a 3.5-inch front lift and 2.5-inch rear lift for enhanced clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Ground Clearance:\u003c\/strong\u003e Conquer rough terrain with improved height and off-road capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Control Arms:\u003c\/strong\u003e Includes forged aluminum control arms for strength and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ball Joints:\u003c\/strong\u003e Features POM ball joints for a greater range of motion and smoother installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Setup:\u003c\/strong\u003e Pre-installed ball joints make installation quick and effortless.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Configurable with All Shock\/Strut Options:\u003c\/strong\u003e Choose from our nitrogen-charged N3's to the premium Vertex reservoir for the perfect ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2022-2024 Chevrolet Silverado 1500 (2WD\/4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Does NOT fit 2019 \"Classic\" models. (2018 body style) Does NOT fit models with Adaptive Ride Control. (optional upgrade on High Country models) Does NOT fit LT Trail Boss or Custom Trail Boss models as they are equipped with a 2-inch factory lift. Does NOT fit ZR2 models as it is equipped with a 2-inch factory lift and Multimatic DSSV dampers. Due to variances in motor weight Rough Country's replacement strut options do NOT work on diesel models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671148232817,"sku":"28240RED","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/19-20_gm_1500_3in_m1_strut_kit_-_28240red.jpg?v=1791959284"},{"product_id":"rough-country-3-5-inch-lift-kit-m1-rear-mono-leaf-chevy-silverado-1500-2wd-4wd-25-26-28240red-a","title":"Rough Country 3.5 Inch Lift Kit | M1 | Rear Mono Leaf | Chevy Silverado 1500 2WD\/4WD (25-26)","description":"\u003cp\u003eExplore New Heights: GM's fourth-generation Silverado 1500 features an impressive all-new design that’s built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country’s 3.5-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's 3.5in lift features a set of forged aluminum upper control arms to provide the correct suspension geometry in our most durable control arm to date! This perfect-height lift is a great choice for anyone who wants more than a simple level but doesn’t quite want the full height of a 6-inch option. This kit lifts and levels the front of the vehicle with the rear, offering enough increased ground clearance to run up to 33\" tires with an improved, aggressive look. We didn't want to limit you to one standard kit. Rough Country's 3.5-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: Requiring the use of a strut compressor to install, an estimated timeframe of 5-6 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 3.5\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Ride Height:\u003c\/strong\u003e Achieves a perfectly leveled stance by lifting the front of your vehicle 3.5 inches and the rear 2.5 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Ground Clearance:\u003c\/strong\u003e Conquer rugged terrain with ease, thanks to the increased clearance that boosts off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Control Arms:\u003c\/strong\u003e Features forged aluminum control arms engineered for superior strength and durability, even in the harshest conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ball Joint Design:\u003c\/strong\u003e POM ball joints offer an extended range of motion, making installation simpler while improving overall performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Installed Convenience:\u003c\/strong\u003e Ball joints come pre-installed for a straightforward, hassle-free installation process.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD\/4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit LT Trail Boss or Custom Trail Boss models as they are equipped with a 2-inch factory lift. Does NOT fit ZR2 models as it is equipped with a 2-inch factory lift and Multimatic DSSV dampers. Does NOT fit models with Adaptive Ride Control.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671148560497,"sku":"28240RED_A","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/19-20_gm_1500_3in_m1_strut_kit_-_28240red_1.jpg?v=1791959286"},{"product_id":"rough-country-3-5-inch-lift-kit-m1-rear-mono-leaf-chevy-silverado-1500-2wd-4wd-25-26-28240-a","title":"Rough Country 3.5 Inch Lift Kit | M1 | Rear Mono Leaf | Chevy Silverado 1500 2WD\/4WD (25-26)","description":"\u003cp\u003eExplore New Heights: GM's fourth-generation Silverado 1500 features an impressive all-new design that’s built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country’s 3.5-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's 3.5in lift features a set of forged aluminum upper control arms to provide the correct suspension geometry in our most durable control arm to date! This perfect-height lift is a great choice for anyone who wants more than a simple level but doesn’t quite want the full height of a 6-inch option. This kit lifts and levels the front of the vehicle with the rear, offering enough increased ground clearance to run up to 33\" tires with an improved, aggressive look. We didn't want to limit you to one standard kit. Rough Country's 3.5-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: Requiring the use of a strut compressor to install, an estimated timeframe of 5-6 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 3.5\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Ride Height:\u003c\/strong\u003e Achieves a perfectly leveled stance by lifting the front of your vehicle 3.5 inches and the rear 2.5 inches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Ground Clearance:\u003c\/strong\u003e Conquer rugged terrain with ease, thanks to the increased clearance that boosts off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Control Arms:\u003c\/strong\u003e Features forged aluminum control arms engineered for superior strength and durability, even in the harshest conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ball Joint Design:\u003c\/strong\u003e POM ball joints offer an extended range of motion, making installation simpler while improving overall performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Installed Convenience:\u003c\/strong\u003e Ball joints come pre-installed for a straightforward, hassle-free installation process.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD\/4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit LT Trail Boss or Custom Trail Boss models as they are equipped with a 2-inch factory lift. Does NOT fit ZR2 models as it is equipped with a 2-inch factory lift and Multimatic DSSV dampers. Does NOT fit models with Adaptive Ride Control.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671148691569,"sku":"28240_A","price":1169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/19-20_gm_1500_3in_m1_strut_kit_-_28240_1.jpg?v=1791959288"},{"product_id":"rough-country-3-5-inch-lift-kit-m1-rear-mono-leaf-chevy-silverado-1500-22-24-28240","title":"Rough Country 3.5 Inch Lift Kit | M1 | Rear Mono Leaf | Chevy Silverado 1500 (22-24)","description":"\u003cp\u003eExplore New Heights: GM's fourth-generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 3.5-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's 3.5in lift features a set of forged aluminum upper control arms to provide the correct suspension geometry in our most durable control arm to date! This perfect-height lift is a great choice for anyone who wants more than a simple level but doesn't quite want the full height of a 6-inch option. This kit lifts and levels the front of the vehicle with the rear, offering enough increased ground clearance to run up to 295\/55R20 tires with an improved, aggressive look. We didn't want to limit you to one standard kit. Rough Country's 3.5-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: Requiring the use of a strut compressor to install, an estimated timeframe of 5-6 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 3.5\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevels Your Ride:\u003c\/strong\u003e Lifts and levels the front with the rear for a balanced stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Lift:\u003c\/strong\u003e Provides a 3.5-inch front lift and 2.5-inch rear lift for enhanced clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Ground Clearance:\u003c\/strong\u003e Conquer rough terrain with improved height and off-road capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Control Arms:\u003c\/strong\u003e Includes forged aluminum control arms for strength and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ball Joints:\u003c\/strong\u003e Features POM ball joints for a greater range of motion and smoother installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Setup:\u003c\/strong\u003e Pre-installed ball joints make installation quick and effortless.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Configurable with All Shock\/Strut Options:\u003c\/strong\u003e Choose from our nitrogen-charged N3's to the premium Vertex reservoir for the perfect ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2022-2024 Chevrolet Silverado 1500 (2WD\/4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Does NOT fit 2019 \"Classic\" models. (2018 body style) Does NOT fit models with Adaptive Ride Control. (optional upgrade on High Country models) Does NOT fit LT Trail Boss or Custom Trail Boss models as they are equipped with a 2-inch factory lift. Does NOT fit ZR2 models as it is equipped with a 2-inch factory lift and Multimatic DSSV dampers. Due to variances in motor weight Rough Country's replacement strut options do NOT work on diesel models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671148920945,"sku":"28240","price":1169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/19-20_gm_1500_3in_m1_strut_kit_-_28240.jpg?v=1791959291"},{"product_id":"rough-country-3-5-inch-m1r-lift-kit-toyota-tundra-4wd-2022-2026-70344","title":"Rough Country 3.5 Inch M1R Lift Kit | Toyota Tundra 4WD (2022-2026)","description":"\u003cp\u003eTransform Your Tundra with Rough Country's 3.5-Inch Lift Kit: Elevate your third-generation Toyota Tundra with Rough Country's 3.5-Inch Lift Kit for an aggressive, head-turning stance. Correct the factory \"nose-down\" posture, gain improved ground clearance, and run larger tires for enhanced off-road performance. Whether tackling rugged trails or dominating the streets, this kit delivers both style and capability. Engineered for Maximum Performance: The kit includes premium Forged Aluminum Upper Control Arms with durable rubber bushings, ensuring optimal ball joint angles for factory-like geometry. Rear lifted coil springs provide balanced lift and smooth ride quality, while the rear track bar bracket keeps your axle perfectly centered for improved stability and handling. Every component is built to endure tough trails and heavy loads. Fully Configurable Ride: Customize your Tundra's performance with Rough Country's shock and strut options, from nitrogen-charged N3 shocks to premium Vertex reservoir systems, allowing you to dial in the perfect ride for your style and terrain. Hassle-Free Installation: This 100% bolt-on kit installs easily at home with standard tools in approximately 4-6 hours. Everything you need is included, so you can get your Tundra ready for action without cutting, drilling, or professional help. Backed by a Limited Lifetime Warranty: Your investment is protected with Rough Country's Limited Lifetime Warranty, covering structural and workmanship defects for as long as you own the vehicle. Enjoy peace of mind along with proven on- and off-road performance.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Designed with an easy bolt-on setup, no cutting or drilling required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Upper Control Arms with Durable Rubber Bushings:\u003c\/strong\u003e Engineered to maintain optimal ball joint angles while featuring heavy-duty rubber bushings that reduce wear and deliver long-lasting performance on and off the road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Lifted Coil Springs Included:\u003c\/strong\u003e Specifically tuned rear coils provide balanced lift, improved load support, and a smooth, controlled ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Track Bar Bracket Included:\u003c\/strong\u003e Ensures the rear axle stays perfectly centered, improving stability and handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ground Clearance:\u003c\/strong\u003e Conquer rugged terrain with improved clearance for off-road adventures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Stance:\u003c\/strong\u003e Levels the front and rear of your Tundra, giving it a bold, aggressive look while improving ride quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Configurable with All Shock and Strut Options:\u003c\/strong\u003e Choose from nitrogen-charged N3 shocks to premium Vertex reservoir systems to dial in the perfect ride quality for your build.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2022-2026 Toyota Tundra (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Does NOT fit TRD Pro models as they are equipped with a 1.1\" factory lift. Does NOT fit models equipped with Adaptive Variable Suspension (AVS) system. Does NOT fit models equipped with OE Air Ride (Load-leveling Rear Height Control Air Suspension).\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671149019249,"sku":"70344","price":1769.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2022_tundra_3.5in_m1r_lift_-_70344.jpg?v=1791959292"},{"product_id":"rough-country-3-5-inch-lift-kit-vertex-ram-1500-2wd-4wd-2019-2026-31450","title":"Rough Country 3.5 Inch Lift Kit | Vertex | Ram 1500 2WD\/4WD (2019-2026)","description":"\u003cp\u003eRough Country's 3.5-Inch Bolt-On Kit delivers aggressive good looks, increased ground clearance, and an easy installation - all at an unbeatable value. Take your RAM 1500 to the next level with this premium lift kit, designed to enhance both on-road comfort and off-road capability. Increased Ground Clearance: Tackle rocky trails and rough terrain with confidence! This lift kit gives your RAM 1500 the extra height needed to clear obstacles effortlessly, improving both performance and protection. Front-to-Rear Leveling: Say goodbye to factory rake! This kit levels the front and rear of your truck, giving it a bold, aggressive stance that commands attention on and off the road. Premium Upper Control Arms: Equipped with forged aluminum upper control arms, this kit enhances strength and durability. These high-quality arms feature POM ball joints, providing a greater range of motion and smoother articulation for superior handling. Pre-Installed Ball Joints: No hassle, no extra steps - our ball joints come pre-installed, making installation easier and ensuring long-term reliability. Hassle-Free Installation: Enjoy a bolt-on installation with no cutting or drilling required! This means less time in the garage and more time conquering trails. Wide Compatibility: Designed for versatility, this kit fits a variety of RAM 1500 models - including Rebel trims - while maintaining factory-like ride quality. At Rough Country, we know every off-road journey is unique. That's why our 3.5-inch kit is fully adaptable, allowing you to choose between nitrogen-charged N3 shocks for a smooth ride or M1 Monotube shocks for premium performance. With Rough Country, you're not just lifting your RAM - you're redefining your off-road experience.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Easy bolt-on design for a quick and seamless setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Modifications Needed:\u003c\/strong\u003e No cutting or drilling required for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Upper Control Arms:\u003c\/strong\u003e Includes new forged aluminum control arms for added strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Range of Motion:\u003c\/strong\u003e POM ball joints allow greater articulation and easier installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Installed Ball Joints:\u003c\/strong\u003e Comes ready to install, saving you time and effort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Ground Clearance:\u003c\/strong\u003e Provides extra height for tackling rough terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates the factory rake for a balanced stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible Upgrade:\u003c\/strong\u003e Can be returned to stock if needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Compatibility:\u003c\/strong\u003e Works with various models, including Rebel trims.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Configurable with Multiple Shock Options:\u003c\/strong\u003e Choose from our nitrogen-charged N3 shocks to the premium Vertex reservoir's for the perfect ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2026 Ram 1500 (2WD\/4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Due to variances in motor weight our replacement struts do NOT fit 3.6L V6 models. Does NOT fit models with 4-Corner Air-Suspension found standard on Limited and Limited Longhorn models. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped, click here. Does NOT fit TRX models as they are equipped with a long-travel suspension and Bilstein Black Hawk e2 adaptive performance shocks. Does NOT fit Warlock models as they are equipped with a 1-inch factory lift. Tire \u0026amp; Wheel Details Models retaining factory wheels are advised to run no wider than an 11.5\" wide tire. For additional clearance on models equipped with aggressive side wall tires a 0.25 wheel spacer is recommended SKU: #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671149346929,"sku":"31450","price":2759.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/19-26_ram_1500_3in_aluminum_uca_vertex_kit_-_31450.jpg?v=1791959295"},{"product_id":"rough-country-6-inch-lift-kit-toyota-tundra-trd-pro-4wd-2022-2026-72700","title":"Rough Country 6 Inch Lift Kit | Toyota Tundra TRD PRO 4WD (2022-2026)","description":"\u003cp\u003eCommanding TRD PRO Lift: Want to give your Toyota Tundra TRD PRO a stronger, more dominating presence on and off the road? Rough Country's 6-Inch Lift Kit delivers everything you need to achieve a bold, lifted stance while maintaining smooth ride quality and dependable handling. This system is engineered to boost your Tundra's trail performance and create the clearance needed to run larger 35-inch tires, ensuring your truck stands out both in town and on the trail. Engineered for Performance: Built using the latest computer-aided design process and precision laser-cut materials, this lift kit ensures a perfect fit and lasting durability. The high-clearance crossmember design dramatically increases ground clearance for improved approach angles and serious off-road capability. Rear upper control arm relocation brackets provide improved droop clearance, allowing the suspension to articulate more freely and maintain control over rugged terrain. Best of all, the system preserves factory alignment specs and track width, giving you predictable handling, stability, and road manners. Hassle-Free Installation: Every Rough Country 6-Inch Lift Kit comes with all the premium components needed to complete the job with confidence. From precision-engineered brackets to high-strength hardware, this kit is designed for a straightforward installation with long-term dependability. And because it levels the front of the vehicle with the rear, you get a clean, aggressive look from every angle. Backed by Rough Country's limited lifetime replacement warranty, you can drive with peace of mind knowing your investment is protected from workmanship and structural defects.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Clearance Crossmember Design:\u003c\/strong\u003e Delivers superior ground clearance for better approach angles and true off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Laser-Cut Construction:\u003c\/strong\u003e Manufactured using the latest computer-aided design for an exact fit and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Geometry Maintained:\u003c\/strong\u003e Keeps stock track width and alignment specs for predictable handling and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Rear Suspension Articulation:\u003c\/strong\u003e Rear upper control arm relocation brackets provide additional droop clearance for improved suspension movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 35 Inch Tires:\u003c\/strong\u003e Easily accommodates larger tires for a bolder stance and increased trail capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect Front-to-Rear Stance:\u003c\/strong\u003e Levels the front of the vehicle with the rear for a clean, aggressive look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLifted Knuckles Strut Spacers Front Crossmember Rear Crossmember Brake Line Brackets Differential Drop Brackets Bumpstop Extension Skid Plate Hardware\u003c\/li\u003e\n\u003cli\u003eCoil Spring Spacers Brake Line Brackets Bumpstop Brackets Rear Shock Relocation Brackets Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2022-2026 Toyota Tundra (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTire info:\u003c\/strong\u003e 35x12.50R20:20x9:6x5.5:+18:-;35x12.50R20:20x9:6x5.5:+20:-\u003cbr\u003e\u003cstrong\u003eInstall time:\u003c\/strong\u003e 8-10 hours\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Cutting and drilling is required. Designed exclusively for TRD Pro models. Recalibration of the Toyota Safety Sense (TSS) system may be required after installation. To ensure adequate clearance of the supplied knuckles, this kit requires the use of 20-inch or larger wheels.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671149412465,"sku":"72700","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2022_tundra_trdpro_6in_lift_-_72700.jpg?v=1791959298"},{"product_id":"rough-country-6-inch-lift-kit-n3-strut-toyota-tacoma-4wd-2024-2026-77231","title":"Rough Country 6 Inch Lift Kit | N3 Strut | Toyota Tacoma 4WD (2024-2026)","description":"\u003cp\u003eCommanding Tacoma Transformation: Ready to give your fourth-generation Toyota Tacoma a bold, aggressive stance and serious off-road capability? Rough Country's 6-Inch Lift Kit delivers the height, clearance, and performance you need to stand out on the street and dominate the trail. Designed to level the front with the rear, this system eliminates factory rake while creating the room needed to run larger tires for a more commanding presence. Enjoy a smooth, controlled ride both on and off-road with a system engineered for real-world performance. Engineered for Strength and Performance: Built using precision laser-cut components and advanced CAD engineering, this kit is designed for durability and a perfect fit. The high-clearance crossmember design increases ground clearance, while lifted knuckles help maintain proper suspension geometry and handling. This kit includes rear coil spring spacers to achieve a level stance, with the option to upgrade to replacement rear lifted coil springs for improved load support, and enhanced ride quality. A durable skid plate provides added underbody protection when tackling rough terrain. Maintaining factory track width and alignment specs ensures predictable handling and stability, while the included CV front driveshaft helps reduce driveline angles and eliminate vibrations. Rear upper control arm relocation brackets further enhance suspension geometry, improving droop travel and overall articulation for better off-road capability. Installation and Warranty: This kit includes the essential components needed for installation, along with fully configurable shock and strut options ranging from nitrogen-charged N3 shocks to premium M1R reservoir systems for dialed-in ride quality. Rough Country backs the lift kit components with a limited lifetime replacement warranty, while the shocks and struts are covered by a three-year manufacturer warranty, giving you confidence and protection mile after mile.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Clearance Crossmember Design:\u003c\/strong\u003e Gain unmatched ground clearance with a specially engineered crossmember that improves underbody clearance for tackling tougher trails with confidence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront to Rear Leveling:\u003c\/strong\u003e Eliminate factory rake and achieve a clean, aggressive stance by leveling the front of your Tacoma with the rear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineered Construction:\u003c\/strong\u003e Built using 100% laser-cut materials and advanced CAD design for a precise fit, superior strength, and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Geometry Retention:\u003c\/strong\u003e Maintains proper track width and alignment specifications to preserve factory-like handling and steering performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCV Front Driveshaft Included:\u003c\/strong\u003e Comes equipped with a CV-style front driveshaft designed to reduce driveline angles and eliminate vibrations for smoother operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Upper Control Arm Relocation Brackets:\u003c\/strong\u003e Improves suspension geometry and increases droop travel, allowing for enhanced articulation and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Rear Lifted Coil Springs:\u003c\/strong\u003e Upgrade to replacement rear coil springs for increased lift height, improved load support, and enhanced ride quality over standard spacer configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Configurable Shock and Strut Options:\u003c\/strong\u003e Customize your ride quality with multiple options, from nitrogen-charged N3 shocks to premium M1R reservoir systems for maximum performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Toyota Tacoma (4WD\/AWD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Cutting and drilling is required. Does NOT fit TRD PreRunner, SR, or SR5 models with rear leaf springs. Does NOT fit Limited or Limited i-FORCE MAX models as they are equipped with Adaptive Variable Suspension (AVS). Does NOT fit Trailhunter models as they are equipped with OLD Man EMU suspension. Does NOT fit TRD PRO models as they are equipped with TRD-tuned FOX suspension. Does NOT fit TRD Off-Road or TRD Off-Road i-FORCE MAX as they are equipped with Bilstein monotube shocks with piggyback reservoirs. Removal of the front valance and mudflaps will be required to run a 35\" tire.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671149510769,"sku":"77231","price":2349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/24-25_tacoma_6in_n3_strut_lift_-_77231_1.jpg?v=1791959300"},{"product_id":"rough-country-6-inch-lift-kit-toyota-tacoma-4wd-2024-2026-77230","title":"Rough Country 6 Inch Lift Kit | Toyota Tacoma 4WD (2024-2026)","description":"\u003cp\u003eCommanding Tacoma Transformation: Ready to give your fourth-generation Toyota Tacoma a bold, aggressive stance and serious off-road capability? Rough Country's 6-Inch Lift Kit delivers the height, clearance, and performance you need to stand out on the street and dominate the trail. Designed to level the front with the rear, this system eliminates factory rake while creating the room needed to run larger tires for a more commanding presence. Enjoy a smooth, controlled ride both on and off-road with a system engineered for real-world performance. Engineered for Strength and Performance: Built using precision laser-cut components and advanced CAD engineering, this kit is designed for durability and a perfect fit. The high-clearance crossmember design increases ground clearance, while lifted knuckles help maintain proper suspension geometry and handling. This kit includes rear coil spring spacers to achieve a level stance, with the option to upgrade to replacement rear lifted coil springs for improved load support, and enhanced ride quality. A durable skid plate provides added underbody protection when tackling rough terrain. Maintaining factory track width and alignment specs ensures predictable handling and stability, while the included CV front driveshaft helps reduce driveline angles and eliminate vibrations. Rear upper control arm relocation brackets further enhance suspension geometry, improving droop travel and overall articulation for better off-road capability. Installation and Warranty: This kit includes the essential components needed for installation, along with fully configurable shock and strut options ranging from nitrogen-charged N3 shocks to premium M1R reservoir systems for dialed-in ride quality. Rough Country backs the lift kit components with a limited lifetime replacement warranty, while the shocks and struts are covered by a three-year manufacturer warranty, giving you confidence and protection mile after mile.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Clearance Crossmember Design:\u003c\/strong\u003e Gain unmatched ground clearance with a specially engineered crossmember that improves underbody clearance for tackling tougher trails with confidence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront to Rear Leveling:\u003c\/strong\u003e Eliminate factory rake and achieve a clean, aggressive stance by leveling the front of your Tacoma with the rear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineered Construction:\u003c\/strong\u003e Built using 100% laser-cut materials and advanced CAD design for a precise fit, superior strength, and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Geometry Retention:\u003c\/strong\u003e Maintains proper track width and alignment specifications to preserve factory-like handling and steering performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCV Front Driveshaft Included:\u003c\/strong\u003e Comes equipped with a CV-style front driveshaft designed to reduce driveline angles and eliminate vibrations for smoother operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Upper Control Arm Relocation Brackets:\u003c\/strong\u003e Improves suspension geometry and increases droop travel, allowing for enhanced articulation and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Rear Lifted Coil Springs:\u003c\/strong\u003e Upgrade to replacement rear coil springs for increased lift height, improved load support, and enhanced ride quality over standard spacer configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Configurable Shock and Strut Options:\u003c\/strong\u003e Customize your ride quality with multiple options, from nitrogen-charged N3 shocks to premium M1R reservoir systems for maximum performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Toyota Tacoma (4WD\/AWD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Cutting and drilling is required. Does NOT fit TRD PreRunner, SR, or SR5 models with rear leaf springs. Does NOT fit Limited or Limited i-FORCE MAX models as they are equipped with Adaptive Variable Suspension (AVS). Does NOT fit Trailhunter models as they are equipped with OLD Man EMU suspension. Does NOT fit TRD PRO models as they are equipped with TRD-tuned FOX suspension. Does NOT fit TRD Off-Road or TRD Off-Road i-FORCE MAX as they are equipped with Bilstein monotube shocks with piggyback reservoirs. Removal of the front valance and mudflaps will be required to run a 35\" tire.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671149576305,"sku":"77230","price":1799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/24-25_tacoma_6in_n3_lift_-_77230_1.jpg?v=1791959301"},{"product_id":"rough-country-6-inch-lift-kit-m1-toyota-tacoma-4wd-2024-2026-77240","title":"Rough Country 6 Inch Lift Kit | M1 | Toyota Tacoma 4WD (2024-2026)","description":"\u003cp\u003eCommanding Tacoma Transformation: Ready to give your fourth-generation Toyota Tacoma a bold, aggressive stance and serious off-road capability? Rough Country's 6-Inch Lift Kit delivers the height, clearance, and performance you need to stand out on the street and dominate the trail. Designed to level the front with the rear, this system eliminates factory rake while creating the room needed to run larger tires for a more commanding presence. Enjoy a smooth, controlled ride both on and off-road with a system engineered for real-world performance. Engineered for Strength and Performance: Built using precision laser-cut components and advanced CAD engineering, this kit is designed for durability and a perfect fit. The high-clearance crossmember design increases ground clearance, while lifted knuckles help maintain proper suspension geometry and handling. This kit includes rear coil spring spacers to achieve a level stance, with the option to upgrade to replacement rear lifted coil springs for improved load support, and enhanced ride quality. A durable skid plate provides added underbody protection when tackling rough terrain. Maintaining factory track width and alignment specs ensures predictable handling and stability, while the included CV front driveshaft helps reduce driveline angles and eliminate vibrations. Rear upper control arm relocation brackets further enhance suspension geometry, improving droop travel and overall articulation for better off-road capability. Installation and Warranty: This kit includes the essential components needed for installation, along with fully configurable shock and strut options ranging from nitrogen-charged N3 shocks to premium M1R reservoir systems for dialed-in ride quality. Rough Country backs the lift kit components with a limited lifetime replacement warranty, while the shocks and struts are covered by a three-year manufacturer warranty, giving you confidence and protection mile after mile.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Clearance Crossmember Design:\u003c\/strong\u003e Gain unmatched ground clearance with a specially engineered crossmember that improves underbody clearance for tackling tougher trails with confidence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront to Rear Leveling:\u003c\/strong\u003e Eliminate factory rake and achieve a clean, aggressive stance by leveling the front of your Tacoma with the rear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineered Construction:\u003c\/strong\u003e Built using 100% laser-cut materials and advanced CAD design for a precise fit, superior strength, and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Geometry Retention:\u003c\/strong\u003e Maintains proper track width and alignment specifications to preserve factory-like handling and steering performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCV Front Driveshaft Included:\u003c\/strong\u003e Comes equipped with a CV-style front driveshaft designed to reduce driveline angles and eliminate vibrations for smoother operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Upper Control Arm Relocation Brackets:\u003c\/strong\u003e Improves suspension geometry and increases droop travel, allowing for enhanced articulation and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Rear Lifted Coil Springs:\u003c\/strong\u003e Upgrade to replacement rear coil springs for increased lift height, improved load support, and enhanced ride quality over standard spacer configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Configurable Shock and Strut Options:\u003c\/strong\u003e Customize your ride quality with multiple options, from nitrogen-charged N3 shocks to premium M1R reservoir systems for maximum performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Toyota Tacoma (4WD\/AWD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Cutting and drilling is required. Does NOT fit TRD PreRunner, SR, or SR5 models with rear leaf springs. Does NOT fit Limited or Limited i-FORCE MAX models as they are equipped with Adaptive Variable Suspension (AVS). Does NOT fit Trailhunter models as they are equipped with OLD Man EMU suspension. Does NOT fit TRD PRO models as they are equipped with TRD-tuned FOX suspension. Does NOT fit TRD Off-Road or TRD Off-Road i-FORCE MAX as they are equipped with Bilstein monotube shocks with piggyback reservoirs. Removal of the front valance and mudflaps will be required to run a 35\" tire.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671149674609,"sku":"77240","price":2609.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/24-25_tacoma_6in_m1_lift_-_77240_1.jpg?v=1791959304"},{"product_id":"rough-country-6-inch-lift-kit-m1r-toyota-tacoma-4wd-2024-2026-77244","title":"Rough Country 6 Inch Lift Kit | M1R | Toyota Tacoma 4WD (2024-2026)","description":"\u003cp\u003eCommanding Tacoma Transformation: Ready to give your fourth-generation Toyota Tacoma a bold, aggressive stance and serious off-road capability? Rough Country's 6-Inch Lift Kit delivers the height, clearance, and performance you need to stand out on the street and dominate the trail. Designed to level the front with the rear, this system eliminates factory rake while creating the room needed to run larger tires for a more commanding presence. Enjoy a smooth, controlled ride both on and off-road with a system engineered for real-world performance. Engineered for Strength and Performance: Built using precision laser-cut components and advanced CAD engineering, this kit is designed for durability and a perfect fit. The high-clearance crossmember design increases ground clearance, while lifted knuckles help maintain proper suspension geometry and handling. This kit includes rear coil spring spacers to achieve a level stance, with the option to upgrade to replacement rear lifted coil springs for improved load support, and enhanced ride quality. A durable skid plate provides added underbody protection when tackling rough terrain. Maintaining factory track width and alignment specs ensures predictable handling and stability, while the included CV front driveshaft helps reduce driveline angles and eliminate vibrations. Rear upper control arm relocation brackets further enhance suspension geometry, improving droop travel and overall articulation for better off-road capability. Installation and Warranty: This kit includes the essential components needed for installation, along with fully configurable shock and strut options ranging from nitrogen-charged N3 shocks to premium M1R reservoir systems for dialed-in ride quality. Rough Country backs the lift kit components with a limited lifetime replacement warranty, while the shocks and struts are covered by a three-year manufacturer warranty, giving you confidence and protection mile after mile.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Clearance Crossmember Design:\u003c\/strong\u003e Gain unmatched ground clearance with a specially engineered crossmember that improves underbody clearance for tackling tougher trails with confidence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront to Rear Leveling:\u003c\/strong\u003e Eliminate factory rake and achieve a clean, aggressive stance by leveling the front of your Tacoma with the rear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineered Construction:\u003c\/strong\u003e Built using 100% laser-cut materials and advanced CAD design for a precise fit, superior strength, and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Geometry Retention:\u003c\/strong\u003e Maintains proper track width and alignment specifications to preserve factory-like handling and steering performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCV Front Driveshaft Included:\u003c\/strong\u003e Comes equipped with a CV-style front driveshaft designed to reduce driveline angles and eliminate vibrations for smoother operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Upper Control Arm Relocation Brackets:\u003c\/strong\u003e Improves suspension geometry and increases droop travel, allowing for enhanced articulation and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Rear Lifted Coil Springs:\u003c\/strong\u003e Upgrade to replacement rear coil springs for increased lift height, improved load support, and enhanced ride quality over standard spacer configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Configurable Shock and Strut Options:\u003c\/strong\u003e Customize your ride quality with multiple options, from nitrogen-charged N3 shocks to premium M1R reservoir systems for maximum performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Toyota Tacoma (4WD\/AWD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Cutting and drilling is required. Does NOT fit TRD PreRunner, SR, or SR5 models with rear leaf springs. Does NOT fit Limited or Limited i-FORCE MAX models as they are equipped with Adaptive Variable Suspension (AVS). Does NOT fit Trailhunter models as they are equipped with OLD Man EMU suspension. Does NOT fit TRD PRO models as they are equipped with TRD-tuned FOX suspension. Does NOT fit TRD Off-Road or TRD Off-Road i-FORCE MAX as they are equipped with Bilstein monotube shocks with piggyback reservoirs. Removal of the front valance and mudflaps will be required to run a 35\" tire.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671149772913,"sku":"77244","price":3149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/24-25_tacoma_6in_m1r_lift_-_77244_1.jpg?v=1791959308"},{"product_id":"rough-country-2-inch-lift-kit-3-door-suzuki-jimny-4wd-2018-2026-17000a","title":"Rough Country 2 Inch Lift Kit | 3-Door | Suzuki Jimny 4WD (2018-2026)","description":"\u003cp\u003eBold Lift. Confident Capability: Transform your Suzuki Jimny with Rough Country's 2-Inch Lift Kit and give your compact 4x4 the aggressive stance and added capability it deserves. This kit levels the factory nose-down rake by raising the front to match the rear, delivering a clean, balanced profile that looks right at home on the street or the trail. With increased ground clearance, you'll have the extra height you need to clear obstacles and explore further with confidence. Engineered for Ride Quality and Control: Designed specifically for the Suzuki Jimny, this kit features application-specific front and rear coil springs engineered for optimal ride quality and long-term durability. Lower control arm caster bushings are included to help maintain proper alignment and steering geometry after lifting, preserving stability and predictable handling. Application-valved N3 Series shock absorbers are also included, offering a carefully tuned balance of on-road comfort and off-road performance so you can enjoy a smooth ride wherever you roam. A rear track bar bracket is included to center the axle, ensuring proper suspension geometry and precise handling after lift installation. Complete Kit. Hassle-Free Installation: Rough Country's 2-Inch Lift Kit is built for a straightforward bolt-on installation using factory mounting locations, making it an easy upgrade for your Jimny. Each kit includes all the components necessary to properly lift and level your vehicle while maintaining drivability. Backed by Rough Country's limited lifetime replacement warranty against manufacturer defects, this lift kit delivers the performance, reliability, and peace of mind you expect from a trusted name in off-road suspension.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Bolt-On Installation:\u003c\/strong\u003e Designed for a straightforward install using factory mounting points for a true bolt-on upgrade with no major modifications required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Stance and Leveling:\u003c\/strong\u003e Eliminates the factory nose-down rake by raising the front to match the rear, delivering a clean, aggressive, level profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Ground Clearance:\u003c\/strong\u003e Gain valuable ride height to confidently tackle trails, obstacles, and uneven terrain without sacrificing everyday drivability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower Control Arm Caster Bushings Included:\u003c\/strong\u003e Corrects caster geometry after lifting to maintain proper alignment, steering stability, and predictable handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication-Specific Front and Rear Coil Springs:\u003c\/strong\u003e Engineered specifically for the Suzuki Jimny to deliver optimal ride quality, load support, and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN3 Series Shock Absorbers:\u003c\/strong\u003e Includes application-valved N3 shocks tuned for the Suzuki Jimny, providing a balanced blend of on-road comfort and off-road performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e(2) Coil Springs Caster Bushings Brake Line Brackets Hardware\u003c\/li\u003e\n\u003cli\u003e(2) Coil Springs Track Bar Bracket Brake Line Brackets Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2021-2025 Suzuki Jimny (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstall time:\u003c\/strong\u003e 2-4 hours\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Designed exclusively for 3-door models. Installation of the included caster bushings requires a bushing press or removal tool to ensure proper fitment and alignment.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671150133361,"sku":"17000A","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/18-25_suzuki_jimny_2in_n3_lift_-_17000.jpg?v=1791959313"},{"product_id":"rough-country-3-5-inch-lift-kit-vertex-v2-toyota-tacoma-4wd-2024-2026-75657","title":"Rough Country 3.5 Inch Lift Kit | Vertex\/V2 | Toyota Tacoma 4WD (2024-2026)","description":"\u003cp\u003eIt's time to unlock the full potential of your fourth-generation Toyota Tacoma with Rough Country's 3.5\" Lift Kit! Whether you're a seasoned off-road enthusiast or just looking to level up your ride, this kit has everything you need. Increased Ground Clearance: Gain additional clearance to tackle challenging terrain with confidence, allowing you to navigate rocks, uneven surfaces, and more without scraping or bottoming out. Provides Front and Rear Leveling: Our kit levels out the front and rear, giving it that mean, leveled look that's sure to turn heads on and off the road. Precision Alignment: We included new upper control arms with durable rubber bushings. This ensures your ball joints stay in peak condition, meaning smoother rides and less wear and tear. Get ready to adventure longer and harder without worry in the world! Centered Axle Stability: The included rear track bar bracket keeps your axle centered under the truck, even during aggressive off-road maneuvers. Bolt-On Simplicity: This kit is installed using a simple bolt-on process. No cutting or drilling is required, which means less time in the garage and more time exploring the great outdoors. Don't let your Tacoma blend in - stand out from the crowd with Rough Country's 3.5\" Lift Kit. With increased ground clearance, leveled front and rear, and precision alignment, you'll be ready to take on any adventure that comes your way. Upgrade your ride today!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Easy, bolt-on design for a quick and secure setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Modifications Needed:\u003c\/strong\u003e No cutting or drilling required for a straightforward upgrade!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgraded Control Arms:\u003c\/strong\u003e Includes new upper control arms for improved suspension performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Ball Joint Angles:\u003c\/strong\u003e Control arms keep ball joints at ideal angles, reducing wear and tear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for Durability:\u003c\/strong\u003e Control arms feature high-quality rubber bushings for long-lasting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Rear Stability:\u003c\/strong\u003e Rear track bar bracket helps center the rear axle for better alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Ground Clearance:\u003c\/strong\u003e Gain extra height to tackle rough terrain with confidence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfectly Balanced Stance:\u003c\/strong\u003e Levels the front and rear of the truck for a sleek, aggressive look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Toyota Tacoma (4WD\/AWD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Does NOT work on models with rear leaf springs. Does NOT fit models equipped with Adaptive Variable Suspension (AVS). Does NOT fit Trailhunter models. (Models equipped with OLD Man EMU suspension.) Does NOT fit TRD PRO models. (Models equipped with TRD-tuned FOX suspension.) Does NOT fit TRD models with TRD Off-Road Suspension. (Bilstein reservoir struts 48510-AK031\/48510-AK032).\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671150362737,"sku":"75657","price":2259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/24-25_tacoma_3.5in_vertex_v2_lift_-_75657.jpg?v=1791959317"},{"product_id":"rough-country-3-5-inch-lift-kit-vertex-toyota-tacoma-4wd-2024-2026-75650","title":"Rough Country 3.5 Inch Lift Kit | Vertex | Toyota Tacoma 4WD (2024-2026)","description":"\u003cp\u003eIt's time to unlock the full potential of your fourth-generation Toyota Tacoma with Rough Country's 3.5\" Lift Kit! Whether you're a seasoned off-road enthusiast or just looking to level up your ride, this kit has everything you need. Increased Ground Clearance: Gain additional clearance to tackle challenging terrain with confidence, allowing you to navigate rocks, uneven surfaces, and more without scraping or bottoming out. Provides Front and Rear Leveling: Our kit levels out the front and rear, giving it that mean, leveled look that's sure to turn heads on and off the road. Precision Alignment: We included new upper control arms with durable rubber bushings. This ensures your ball joints stay in peak condition, meaning smoother rides and less wear and tear. Get ready to adventure longer and harder without worry in the world! Centered Axle Stability: The included rear track bar bracket keeps your axle centered under the truck, even during aggressive off-road maneuvers. Bolt-On Simplicity: This kit is installed using a simple bolt-on process. No cutting or drilling is required, which means less time in the garage and more time exploring the great outdoors. Don't let your Tacoma blend in - stand out from the crowd with Rough Country's 3.5\" Lift Kit. With increased ground clearance, leveled front and rear, and precision alignment, you'll be ready to take on any adventure that comes your way. Upgrade your ride today!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Easy, bolt-on design for a quick and secure setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Modifications Needed:\u003c\/strong\u003e No cutting or drilling required for a straightforward upgrade!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgraded Control Arms:\u003c\/strong\u003e Includes new upper control arms for improved suspension performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Ball Joint Angles:\u003c\/strong\u003e Control arms keep ball joints at ideal angles, reducing wear and tear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for Durability:\u003c\/strong\u003e Control arms feature high-quality rubber bushings for long-lasting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Rear Stability:\u003c\/strong\u003e Rear track bar bracket helps center the rear axle for better alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Ground Clearance:\u003c\/strong\u003e Gain extra height to tackle rough terrain with confidence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfectly Balanced Stance:\u003c\/strong\u003e Levels the front and rear of the truck for a sleek, aggressive look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Toyota Tacoma (4WD\/AWD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Does NOT work on models with rear leaf springs. Does NOT fit models equipped with Adaptive Variable Suspension (AVS). Does NOT fit Trailhunter models. (Models equipped with OLD Man EMU suspension.) Does NOT fit TRD PRO models. (Models equipped with TRD-tuned FOX suspension.) Does NOT fit TRD models with TRD Off-Road Suspension. (Bilstein reservoir struts 48510-AK031\/48510-AK032).\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671150559345,"sku":"75650","price":2899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/24-25_tacoma_3.5in_vertex_strut_lift_-_75650.jpg?v=1791959319"},{"product_id":"rough-country-2-25-inch-coil-spring-lift-kit-ford-f-150-raptor-4wd-2021-2026-9979","title":"Rough Country 2.25 Inch Coil Spring Lift Kit | Ford F-150 Raptor 4WD (2021-2026)","description":"\u003cp\u003eUpgrade Your Raptor's Stance the Right Way: Take your Ford F-150 Raptor to the next level with Rough Country's 2.25 Inch Coil Spring Lift Kit. Designed specifically to work with the factory Fox Racing suspension, this kit delivers a clean, balanced lift while maintaining the ride quality Raptor owners expect. With 2.25 inches of front lift and 1 inch in the rear, your truck gains a more aggressive, leveled appearance without sacrificing performance. Engineered for Factory Fox Performance: The front replacement coil springs are built to install on your factory Fox Racing coilovers, allowing you to retain your OEM shocks and preserve the smooth, controlled ride characteristics of the original suspension. High tolerance, precision manufacturing ensures consistent spring rates, proper fitment, and long term durability both on and off the pavement. Level the Stance, Increase Capability: By raising the front 2.25 inches and the rear 1 inch, this kit eliminates the factory rake and provides a confident, leveled profile. The added height increases ground clearance for improved obstacle clearance while maintaining the factory track width for proper handling and stability. Built Tough for Real World Driving: Constructed from durable, high strength materials, these coil springs are engineered to handle daily driving, trail use, and everything in between. Whether you are navigating job sites or heading off road for the weekend, Rough Country delivers dependable performance you can trust. Installation and Warranty Confidence: Installation requires disassembly of the factory struts to swap the front coil springs, making professional installation recommended. Rough Country backs this kit with a five year warranty on the springs and a one year finish warranty, giving you peace of mind mile after mile.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineered Coil Springs:\u003c\/strong\u003e Durable, high tolerance, precision made replacement coil springs designed specifically for the Ford F-150 Raptor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fox Compatible:\u003c\/strong\u003e Front coils are designed to replace the factory springs on OEM Fox Racing coilovers while retaining the factory shocks for exceptional ride quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Lift and Leveling:\u003c\/strong\u003e Raises the front 2.25 inches and the rear 1 inch to create a more aggressive, leveled stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Ground Clearance:\u003c\/strong\u003e Adds additional ride height for increased clearance on and off road without compromising suspension geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains Factory Track Width:\u003c\/strong\u003e Engineered to retain the Raptor's original track width for proper fitment and stability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCoil Springs\u003c\/li\u003e\n\u003cli\u003eCoil Springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2021-2026 Ford F-150 (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTire info:\u003c\/strong\u003e 37x12.50R17:17x9:6x5.5:-12:-;37x12.50R17:Factory 17:6x5.5:-:-\u003cbr\u003e\u003cstrong\u003eInstall time:\u003c\/strong\u003e 3-4 hours\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Strut disassembly required to complete installation. Due to variances in coil spring rating, this kit does NOT fit Raptor R models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671150723185,"sku":"9979","price":699.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/21-25_f150_raptor_2.25in_coil_spring_lift-9979.jpg?v=1791959321"},{"product_id":"rough-country-1-5-inch-lift-kit-mitsubishi-outlander-4wd-2022-2026-94000","title":"Rough Country 1.5 Inch Lift Kit | Mitsubishi Outlander 4WD (2022-2026)","description":"\u003cp\u003eCommanding Stance: Give your Mitsubishi Outlander a bolder, more aggressive presence with Rough Country's 1.5in Lift Kit. This kit levels the front of your vehicle with the rear, eliminating the factory nose-down look while creating a confident stance that stands out on the road or trail. More Clearance, More Capability: A modest lift delivers noticeable results, providing increased ground clearance to help navigate uneven terrain and everyday obstacles. The added height allows you to run larger tires for improved traction, enhanced performance, and a tougher, more customized look. Precision Fit Design: Each kit includes high-quality lift spacers engineered for a precise fit on your Outlander. Built for durability and easy installation, this bolt-on solution requires no complex modifications and delivers long-lasting performance backed by Rough Country's commitment to quality.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-End Leveling:\u003c\/strong\u003e Raises the front of your Outlander to match the rear for a balanced stance and improved ride profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Stance Upgrade:\u003c\/strong\u003e Instantly enhances your Outlander's appearance with a tougher, more confident look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdded Ground Clearance:\u003c\/strong\u003e Provides extra clearance to tackle uneven terrain, obstacles, and everyday road hazards with ease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger Tire Capability:\u003c\/strong\u003e Allows fitment of larger tires for improved traction, off-road performance, and a more commanding presence.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStrut Spacers Sway Bar Brackets Hardware\u003c\/li\u003e\n\u003cli\u003eRear Coil Spring Spacers Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2022-2026 Mitsubishi Outlander (AWD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstall time:\u003c\/strong\u003e 3-4 hours\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e _x000D_ _x000D_\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671150919793,"sku":"94000","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/21-24_mitsubishi_outlander_1.5in_lift_-_94000.jpg?v=1791959323"},{"product_id":"rough-country-6-inch-lift-kit-ford-ranger-4wd-2024-2025-46830","title":"Rough Country 6 Inch Lift Kit | Ford Ranger 4WD (2024-2025)","description":"\u003cp\u003eTransform your fifth-generation Ranger from a stock ride into a bold, trail-ready powerhouse with Rough Country's 6-inch Lift Kit. Designed for adventurers who demand both performance and style, this complete kit delivers aggressive stance, serious ground clearance, and the confidence to tackle everything from rugged trails to daily driving. This isn't just a lift, it's a total truck upgrade that enhances ride quality, handling, and off-road capability, giving your Ranger a commanding presence on and off the road. Serious Ground Clearance: Go further with 6 inches of lift, clearing rocks, roots, and obstacles with ease. This kit provides plenty of room to run up to 35-inch tires, giving your Ranger improved traction and off-road capability without sacrificing stability. Front-to-Rear Leveling: Say goodbye to the factory nose-down stance. By leveling the front with the rear, your Ranger achieves a balanced, aggressive look that turns heads while improving overall handling and performance. Heavy-Duty Steel Knuckles: Built for durability, these steel knuckles ensure your suspension performs at its best in the toughest conditions. They provide reliable handling, improved suspension geometry, and long-lasting performance, even under heavy off-road use. Fabricated Rear Lift Blocks: Unlike cast alternatives, these reinforced blocks deliver strength and stability to keep your Ranger steady, smooth, and reliable mile after mile. They're engineered to handle larger tires and maintain proper alignment under extreme conditions. Premium Shocks for Every Terrain: Includes Rough Country's Nitrogen-charged N3 shocks, designed with 10-stage variable valving for the perfect blend of off-road control and on-road comfort. Smooth out rough trails, stay comfortable on the highway, and enjoy the confidence of a ride that's tuned for every adventure. Complete Kit with Everything You Need: This all-inclusive kit comes with crossmembers, steel knuckles, lift blocks, and all necessary hardware for a factory-like installation. Backed by Rough Country's Limited Lifetime Replacement Guarantee, your investment is protected against structural and workmanship defects.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Ground Clearance:\u003c\/strong\u003e Conquer rough terrain and obstacles with ease while protecting your undercarriage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggressive Styling:\u003c\/strong\u003e Elevate your Ranger's look with a bold, off-road-ready stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Achieve a balanced and proportional ride by raising the front to match the rear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35-Inch Tire Compatibility:\u003c\/strong\u003e Provides ample clearance to run larger tires for improved traction and off-road capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes Rear N3 Shock Absorbers:\u003c\/strong\u003e Comes with application-valved rear N3 shocks for enhanced ride quality and performance on every trail.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLifted Knuckles Strut Spacers Front Crossmember Rear Crossmember Sway-Bar Drop Brackets Brake Line Brackets Hardware\u003c\/li\u003e\n\u003cli\u003eLift Blocks Brake Line Relocation Brackets U-Bolts Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2025 Ford Ranger (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTire info:\u003c\/strong\u003e 35x12.50R18:18x8.5:6x5.5:+0:-;35x12.50R18:18x8.5:6x5.5:+1:-\u003cbr\u003e\u003cstrong\u003eInstall time:\u003c\/strong\u003e 6-8 hours\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Does NOT fit Raptor models as they are equipped with 2.5-inch FOX Racing shocks.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671151149169,"sku":"46830","price":1099.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/24-25_ford_ranger_6in_n3_lift_-_46830jpg.jpg?v=1791959327"},{"product_id":"rough-country-6-inch-lift-kit-toyota-sequoia-trd-pro-2023-2025-77300","title":"Rough Country 6 Inch Lift Kit | Toyota Sequoia TRD PRO (2023-2025)","description":"\u003cp\u003eCommanding TRD PRO Lift: Want to give your Toyota Sequoia TRD PRO a stronger, more dominating presence on and off the road? Rough Country's 6-Inch Lift Kit delivers everything you need to achieve a bold, lifted stance while maintaining smooth ride quality and dependable handling. This system is engineered to boost your Sequoia's trail performance and create the clearance needed to run larger 35-inch tires, ensuring your SUV stands out both in town and on the trail. Engineered for Performance: Built using the latest computer-aided design process and precision laser-cut materials, this lift kit ensures a perfect fit and lasting durability. The high-clearance crossmember design dramatically increases ground clearance for improved approach angles and serious off-road capability. Rear upper control arm relocation brackets provide improved droop clearance, allowing the suspension to articulate more freely and maintain control over rugged terrain. Best of all, the system preserves factory alignment specs and track width, giving you predictable handling, stability, and road manners. Hassle-Free Installation: Every Rough Country 6-Inch Lift Kit comes with all the premium components needed to complete the job with confidence. From precision-engineered brackets to high-strength hardware, this kit is designed for a straightforward installation with long-term dependability. And because it levels the front of the vehicle with the rear, you get a clean, aggressive look from every angle. Backed by Rough Country's limited lifetime replacement warranty, you can drive with peace of mind knowing your investment is protected from workmanship and structural defects.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Clearance Crossmember Design:\u003c\/strong\u003e Delivers superior ground clearance for better approach angles and true off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Laser-Cut Construction:\u003c\/strong\u003e Manufactured using the latest computer-aided design for an exact fit and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Geometry Maintained:\u003c\/strong\u003e Keeps stock track width and alignment specs for predictable handling and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Rear Suspension Articulation:\u003c\/strong\u003e Rear upper control arm relocation brackets provide additional droop clearance for improved suspension movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 35 Inch Tires:\u003c\/strong\u003e Easily accommodates larger tires for a bolder stance and increased trail capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect Front-to-Rear Stance:\u003c\/strong\u003e Levels the front of the vehicle with the rear for a clean, aggressive look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLifted Knuckles Strut Spacers Front Crossmember Rear Crossmember Brake Line Brackets Differential Drop Brackets Bumpstop Extension Skid Plate Hardware\u003c\/li\u003e\n\u003cli\u003eCoil Spring Spacers Brake Line Brackets Bumpstop Brackets Rear Shock Relocation Brackets Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2023-2025 Toyota Sequoia (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTire info:\u003c\/strong\u003e 35x12.50R20:20x9:6x5.5:+18:-;35x12.50R20:20x9:6x5.5:+20:-\u003cbr\u003e\u003cstrong\u003eInstall time:\u003c\/strong\u003e 8-10 hours\u003cbr\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Cutting and drilling is required. Designed exclusively for TRD Pro models. Recalibration of the Toyota Safety Sense (TSS) system may be required after installation. To ensure adequate clearance of the supplied knuckles, this kit requires the use of 20-inch or larger wheels.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671151313009,"sku":"77300","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/23-25_sequoia_6in_lift_-_77300.jpg?v=1791959328"},{"product_id":"rough-country-3-5-inch-lift-kit-trd-offroad-m1r-toyota-tacoma-4wd-2024-2026-75644-a","title":"Rough Country 3.5 Inch Lift Kit | TRD Offroad | M1R | Toyota Tacoma 4WD (2024-2026)","description":"\u003cp\u003eWant to add a little attitude to your fourth-generation Tacoma TRD Off-Road? Look no further than our 3.5-inch lift kit! This bad boy is designed to give your truck the lift it deserves, without sacrificing ride quality or handling. Tackle Bigger Obstacles: 3.5 extra inches of lift gives you the freedom to clear rocks, ruts, and roots without scraping your undercarriage. Elevate your game and get ready to dominate tough terrain like never before. Leveling: No more nose-diving -our lift kit will level your truck's front and rear for a more balanced look and improved handling. Precision Upper Control Arms: Protect your ball joints with UCAs designed to handle the rough stuff. Optimized for perfect alignment, they reduce stress and extend the life of your suspension. Plus, the rugged rubber bushings are built to last through even the wildest rides. Rear Track Bar Bracket for Perfect Alignment: Keep that rear axle centered no matter how wild the trail gets. This bracket ensures you stay balanced so you can push your Tacoma to the limit without losing control. Easy, bolt-on installation: No need to break out the welding torch or drill press. Our lift kit is designed for a straightforward, bolt-on installation, which means no cutting or drilling. Why wait? Elevate your Tacoma TRD Off-Road with our 3.5-inch lift kit and unlock its true potential. More attitude, more capability, this is the upgrade your truck's been begging for.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Easy, 100% bolt-on setup with no cutting or drilling required, so you're back on the road fast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Upgrade Package:\u003c\/strong\u003e Includes high-quality upper control arms for improved performance and suspension travel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension Geometry:\u003c\/strong\u003e Control arms maintain ideal ball joint angles, reducing wear and extending component life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for Durability:\u003c\/strong\u003e Control arms feature heavy-duty rubber bushings for long-lasting strength and reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Rear Suspension Alignment:\u003c\/strong\u003e Rear track bar bracket realigns and centers the rear axle for better drivability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ground Clearance:\u003c\/strong\u003e Gain extra height to conquer rough terrain and clear larger obstacles with ease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Ride Height:\u003c\/strong\u003e Levels the front and rear of your truck for a clean, aggressive stance and improved handling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Toyota Tacoma (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e ONLY fits TRD models with TRD Off-Road Suspension. (Bilstein reservoir struts 48510-AK031\/48510-AK032). Does NOT work on models with rear leaf springs. Does NOT fit models equipped with Adaptive Variable Suspension (AVS). Does NOT fit Trailhunter models. (Models equipped with OLD Man EMU suspension.)\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671151542385,"sku":"75644_A","price":1799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/24-25_tacoma_3.5in_m1r_strut_lift_-_75644_1.jpg?v=1791959331"},{"product_id":"rough-country-3-5-inch-lift-kit-adj-lower-fr-d-s-m1-jeep-wrangler-unlimited-24-26-91540","title":"Rough Country 3.5 Inch Lift Kit | Adj Lower | FR D\/S | M1 | Jeep Wrangler Unlimited (24-26)","description":"\u003cp\u003eWhen it comes to your four-door Jeep JL Unlimited, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler Unlimited the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Adjustable Control Arms: The included Rough Country X-Flex Control Arms feature a massive 2.5in diameter body and huge 1.25 threads. The provided X-Flex Joints offer a considerable range, strength, and safety for off-road applications. Boasting an impressive range of motion, Rough Country's lower control arm flex joints are capable of a staggering thirty-five degrees pivot range. Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e Hassle-free setup with no cutting or welding required for a quick and easy upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ground Clearance:\u003c\/strong\u003e Tackle rough terrain with added lift for better obstacle clearance and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake by leveling the front end with the rear for a clean, aggressive stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Engineered to match stock spring rates for confident handling and a smooth, factory-like ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Springs:\u003c\/strong\u003e Delivers predictable handling and improved load support for both daily driving and trail use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Track Bar \u0026amp; Bracket:\u003c\/strong\u003e Heavy-duty construction keeps axles centered and aligned for precise suspension geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Track Bar:\u003c\/strong\u003e Forged solid steel design offers extreme durability and reliability under rugged conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Massive 1.25-inch outer diameter with long-lasting OEM-style rubber bushings for quiet, maintenance-free performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Lower Control Arms:\u003c\/strong\u003e Corrects suspension angles and maintains factory geometry for consistent articulation and ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 4-door models ONLY. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 392 models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671151771761,"sku":"91540","price":1439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_adj_control_arm_m1_kit_drive_shaft_-_62840_91540_90940_91640_91740_91840_65540_69140_3.jpg?v=1791959333"},{"product_id":"rough-country-3-5-inch-lift-kit-adj-lower-fr-d-s-m1-jeep-wrangler-jl-4wd-18-23-62840","title":"Rough Country 3.5 Inch Lift Kit | Adj Lower | FR D\/S | M1 | Jeep Wrangler JL 4WD (18-23)","description":"\u003cp\u003eWhen it comes to your two-door Jeep JL, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e Hassle-free setup with no cutting or welding required for a quick and easy upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ground Clearance:\u003c\/strong\u003e Tackle rough terrain with added lift for better obstacle clearance and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake by leveling the front end with the rear for a clean, aggressive stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Engineered to match stock spring rates for confident handling and a smooth, factory-like ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Springs:\u003c\/strong\u003e Delivers predictable handling and improved load support for both daily driving and trail use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Track Bar \u0026amp; Bracket:\u003c\/strong\u003e Heavy-duty construction keeps axles centered and aligned for precise suspension geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Track Bar:\u003c\/strong\u003e Forged solid steel design offers extreme durability and reliability under rugged conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Massive 1.25-inch outer diameter with long-lasting OEM-style rubber bushings for quiet, maintenance-free performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Lower Control Arms:\u003c\/strong\u003e Corrects suspension angles and maintains factory geometry for consistent articulation and ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2023 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 2-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit Rubicon models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671151935601,"sku":"62840","price":1439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_adj_control_arm_m1_kit_drive_shaft_-_62840_91540_90940_91640_91740_91840_65540_69140.jpg?v=1791959334"},{"product_id":"rough-country-3-5-inch-lift-kit-c-a-drop-fr-d-s-m1-jeep-wrangler-unlimited-18-23-65440","title":"Rough Country 3.5 Inch lift Kit | C\/A Drop | FR D\/S | M1 | Jeep Wrangler Unlimited (18-23)","description":"\u003cp\u003eWhen it comes to your four-door Jeep JL, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Bolt-on design ensures a straightforward install with no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoosted Ground Clearance:\u003c\/strong\u003e Gain the extra height needed to confidently tackle off-road obstacles and rough terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake for a clean, leveled stance that enhances both style and function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Designed to match factory spring rates for superior handling and a smooth, comfortable ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Design:\u003c\/strong\u003e Provides enhanced load support and more consistent handling across varying terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Forged Track Bar System:\u003c\/strong\u003e Includes forged front track bar and rear bracket to keep axles perfectly centered under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Track Bar Construction:\u003c\/strong\u003e Forged solid steel track bar delivers unbeatable strength and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Features a massive 1.25-inch outer diameter and OEM-style rubber bushings for long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arm Drop Brackets:\u003c\/strong\u003e Retain proper control arm geometry to preserve factory alignment and ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2023 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 4-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 392 models. Due to variances in coil spring rate this kit NOT fit 4xe models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671152164977,"sku":"65440","price":1339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_control_arm_drop_m1_kit_drive_shaft_-_62740_94140_94440_94040_91940_90540_65440_69040_3.jpg?v=1791959337"},{"product_id":"rough-country-3-5-inch-lift-kit-adj-lca-fr-d-s-m1-jeep-wrangler-jl-4wd-2024-2026-91840","title":"Rough Country 3.5 Inch Lift Kit | Adj LCA | FR D\/S | M1 | Jeep Wrangler JL 4WD (2024-2026)","description":"\u003cp\u003eWhen it comes to your two-door Jeep JL Rubicon, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler Rubicon the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Adjustable Control Arms: The included Rough Country X-Flex Control Arms feature a massive 2.5in diameter body and huge 1.25 threads. The provided X-Flex Joints offer a considerable range, strength, and safety for off-road applications. Boasting an impressive range of motion, Rough Country's upper flex joints pivot 20 degrees, while the lower control arm flex joints are capable of a staggering thirty-five degrees pivot range. Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple Bolt-On Installation:\u003c\/strong\u003e Designed for hassle-free setup with no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoosted Ground Clearance:\u003c\/strong\u003e Tackle off-road terrain and obstacles with ease thanks to added lift height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates the factory rake for a more aggressive, leveled stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Matched Coil Springs:\u003c\/strong\u003e Engineered to match factory spring rates for a smooth, confident ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Rate Coil Springs:\u003c\/strong\u003e Delivers superior handling characteristics and improved load-carrying capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Axle Centering:\u003c\/strong\u003e Forged track bar and rear track bar bracket ensure axles remain properly aligned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Forged Track Bar:\u003c\/strong\u003e Built from solid steel for extreme strength and long-lasting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Features a 1.25-inch outer diameter with OEM-style rubber bushings for quiet, durable operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Lower Control Arms:\u003c\/strong\u003e Allows optimal geometry retention while accommodating suspension changes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 2-Door models ONLY. Due to variances in coil spring rate this kit ONLY fits Rubicon models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671152328817,"sku":"91840","price":1539.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_adj_control_arm_m1_kit_drive_shaft_-_62840_91540_90940_91640_91740_91840_65540_69140_6.jpg?v=1791959339"},{"product_id":"rough-country-3-5-inch-lift-kit-c-a-drop-fr-d-s-m1-jeep-wrangler-unlimited-24-26-94040","title":"Rough Country 3.5 Inch Lift Kit | C\/A Drop | FR D\/S | M1 | Jeep Wrangler Unlimited (24-26)","description":"\u003cp\u003eWhen it comes to your four-door Jeep JL Rubicon, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler Rubicon the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Bolt-on design ensures a straightforward install with no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoosted Ground Clearance:\u003c\/strong\u003e Gain the extra height needed to confidently tackle off-road obstacles and rough terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake for a clean, leveled stance that enhances both style and function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Designed to match factory spring rates for superior handling and a smooth, comfortable ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Design:\u003c\/strong\u003e Provides enhanced load support and more consistent handling across varying terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Forged Track Bar System:\u003c\/strong\u003e Includes forged front track bar and rear bracket to keep axles perfectly centered under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Track Bar Construction:\u003c\/strong\u003e Forged solid steel track bar delivers unbeatable strength and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Features a massive 1.25-inch outer diameter and OEM-style rubber bushings for long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arm Drop Brackets:\u003c\/strong\u003e Retain proper control arm geometry to preserve factory alignment and ride quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Shock Options:\u003c\/strong\u003e Available with premium N3-Series, M1 Monotube, or M1R Monotube Shocks for superior off-road performance, handling, and ride comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 4-door models ONLY. Due to variances in coil spring rate this kit ONLY fits Rubicon models. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit 392 models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671152459889,"sku":"94040","price":1389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_control_arm_drop_m1_kit_drive_shaft_-_62740_94140_94440_94040_91940_90540_65440_69040_5.jpg?v=1791959342"},{"product_id":"rough-country-3-5-inch-lift-kit-c-a-drop-fr-d-s-m1-jeep-wrangler-unlimited-rubicon-18-23-69040","title":"Rough Country 3.5 Inch Lift Kit | C\/A Drop | FR D\/S | M1 | Jeep Wrangler Unlimited Rubicon (18-23)","description":"\u003cp\u003eWhen it comes to your four-door Jeep JL, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler Rubicon the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Bolt-on design ensures a straightforward install with no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoosted Ground Clearance:\u003c\/strong\u003e Gain the extra height needed to confidently tackle off-road obstacles and rough terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake for a clean, leveled stance that enhances both style and function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Designed to match factory spring rates for superior handling and a smooth, comfortable ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Design:\u003c\/strong\u003e Provides enhanced load support and more consistent handling across varying terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Forged Track Bar System:\u003c\/strong\u003e Includes forged front track bar and rear bracket to keep axles perfectly centered under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Track Bar Construction:\u003c\/strong\u003e Forged solid steel track bar delivers unbeatable strength and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Features a massive 1.25-inch outer diameter and OEM-style rubber bushings for long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arm Drop Brackets:\u003c\/strong\u003e Retain proper control arm geometry to preserve factory alignment and ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2023 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 4-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit ONLY fits Rubicon models. Due to variances in coil spring rate this kit NOT fit 392 models. Due to variances in coil spring rate this kit NOT fit 4xe models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671152689265,"sku":"69040","price":1339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_control_arm_drop_m1_kit_drive_shaft_-_62740_94140_94440_94040_91940_90540_65440_69040_2.jpg?v=1791959343"},{"product_id":"rough-country-3-5-inch-lift-kit-c-a-drop-front-d-s-m1-jeep-wrangler-jl-rubicon-18-23-90540","title":"Rough Country 3.5 Inch Lift Kit | C\/A Drop | Front D\/S | M1 | Jeep Wrangler JL Rubicon (18-23)","description":"\u003cp\u003eWhen it comes to your two-door Jeep JL, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler Rubicon the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Bolt-on design ensures a straightforward install with no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoosted Ground Clearance:\u003c\/strong\u003e Gain the extra height needed to confidently tackle off-road obstacles and rough terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake for a clean, leveled stance that enhances both style and function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Designed to match factory spring rates for superior handling and a smooth, comfortable ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Design:\u003c\/strong\u003e Provides enhanced load support and more consistent handling across varying terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Forged Track Bar System:\u003c\/strong\u003e Includes forged front track bar and rear bracket to keep axles perfectly centered under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Track Bar Construction:\u003c\/strong\u003e Forged solid steel track bar delivers unbeatable strength and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Features a massive 1.25-inch outer diameter and OEM-style rubber bushings for long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arm Drop Brackets:\u003c\/strong\u003e Retain proper control arm geometry to preserve factory alignment and ride quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Shock Options:\u003c\/strong\u003e Available with premium N3-Series, M1 Monotube, or M1R Monotube Shocks for superior off-road performance, handling, and ride comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2023 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 2-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor.\/li\u0026gt; Due to variances in coil spring rate this kit ONLY fits Rubicon models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671152754801,"sku":"90540","price":1389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_control_arm_drop_m1_kit_drive_shaft_-_62740_94140_94440_94040_91940_90540_65440_69040.jpg?v=1791959346"},{"product_id":"rough-country-3-5-inch-lift-kit-adj-lower-fr-d-s-m1-jeep-wrangler-unlimited-18-23-65540","title":"Rough Country 3.5 Inch Lift Kit | Adj Lower | FR D\/S | M1 | Jeep Wrangler Unlimited (18-23)","description":"\u003cp\u003eWhen it comes to your four-door Jeep JL, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e Hassle-free setup with no cutting or welding required for a quick and easy upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ground Clearance:\u003c\/strong\u003e Tackle rough terrain with added lift for better obstacle clearance and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake by leveling the front end with the rear for a clean, aggressive stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Engineered to match stock spring rates for confident handling and a smooth, factory-like ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Springs:\u003c\/strong\u003e Delivers predictable handling and improved load support for both daily driving and trail use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Track Bar \u0026amp; Bracket:\u003c\/strong\u003e Heavy-duty construction keeps axles centered and aligned for precise suspension geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Track Bar:\u003c\/strong\u003e Forged solid steel design offers extreme durability and reliability under rugged conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Massive 1.25-inch outer diameter with long-lasting OEM-style rubber bushings for quiet, maintenance-free performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Lower Control Arms:\u003c\/strong\u003e Corrects suspension angles and maintains factory geometry for consistent articulation and ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2023 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 4-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit 392 models. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit does NOT fits Rubicon models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671152984177,"sku":"65540","price":1339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_adj_control_arm_m1_kit_drive_shaft_-_62840_91540_90940_91640_91740_91840_65540_69140_1_1.jpg?v=1791959347"},{"product_id":"rough-country-3-5-inch-lift-kit-c-a-drop-fr-d-s-m1-jeep-wrangler-jl-4wd-2018-2023-62740","title":"Rough Country 3.5 Inch Lift Kit | C\/A Drop | FR D\/S | M1 | Jeep Wrangler JL 4WD (2018-2023)","description":"\u003cp\u003eWhen it comes to your two-door Jeep JL, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler Rubicon the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Bolt-on design ensures a straightforward install with no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoosted Ground Clearance:\u003c\/strong\u003e Gain the extra height needed to confidently tackle off-road obstacles and rough terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake for a clean, leveled stance that enhances both style and function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Designed to match factory spring rates for superior handling and a smooth, comfortable ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Design:\u003c\/strong\u003e Provides enhanced load support and more consistent handling across varying terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Forged Track Bar System:\u003c\/strong\u003e Includes forged front track bar and rear bracket to keep axles perfectly centered under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Track Bar Construction:\u003c\/strong\u003e Forged solid steel track bar delivers unbeatable strength and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Features a massive 1.25-inch outer diameter and OEM-style rubber bushings for long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arm Drop Brackets:\u003c\/strong\u003e Retain proper control arm geometry to preserve factory alignment and ride quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Shock Options:\u003c\/strong\u003e Available with premium N3-Series, M1 Monotube, or M1R Monotube Shocks for superior off-road performance, handling, and ride comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2023 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 2-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit Rubicon models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671153246321,"sku":"62740","price":1389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_control_arm_drop_m1_kit_drive_shaft_-_62740_94140_94440_94040_91940_90540_65440_69040_1.jpg?v=1791959349"},{"product_id":"rough-country-3-5-inch-lift-kit-adj-lower-fr-d-s-m1-jeep-wrangler-jl-4wd-24-26-91740","title":"Rough Country 3.5 Inch Lift Kit | Adj Lower | FR D\/S | M1 | Jeep Wrangler JL 4WD (24-26)","description":"\u003cp\u003eWhen it comes to your two-door Jeep JL, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e Hassle-free setup with no cutting or welding required for a quick and easy upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ground Clearance:\u003c\/strong\u003e Tackle rough terrain with added lift for better obstacle clearance and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake by leveling the front end with the rear for a clean, aggressive stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Engineered to match stock spring rates for confident handling and a smooth, factory-like ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Springs:\u003c\/strong\u003e Delivers predictable handling and improved load support for both daily driving and trail use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Track Bar \u0026amp; Bracket:\u003c\/strong\u003e Heavy-duty construction keeps axles centered and aligned for precise suspension geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Track Bar:\u003c\/strong\u003e Forged solid steel design offers extreme durability and reliability under rugged conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Massive 1.25-inch outer diameter with long-lasting OEM-style rubber bushings for quiet, maintenance-free performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Lower Control Arms:\u003c\/strong\u003e Corrects suspension angles and maintains factory geometry for consistent articulation and ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 2-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit Rubicon models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671153475697,"sku":"91740","price":1539.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_adj_control_arm_m1_kit_drive_shaft_-_62840_91540_90940_91640_91740_91840_65540_69140_5.jpg?v=1791959352"},{"product_id":"rough-country-3-5-inch-lift-kit-c-a-drop-fr-d-s-m1-jeep-wrangler-jl-4wd-2024-2026-94440","title":"Rough Country 3.5 Inch Lift Kit | C\/A Drop | FR D\/S | M1 | Jeep Wrangler JL 4WD (2024-2026)","description":"\u003cp\u003eWhen it comes to your two-door Jeep JL, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Designed for a straightforward bolt-on process with no cutting or modifications required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ground Clearance:\u003c\/strong\u003e Tackle rough terrain with ease thanks to increased ride height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake for a balanced, aggressive stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Engineered to factory specs for excellent handling and smooth, controlled ride quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Springs:\u003c\/strong\u003e Provide consistent performance with improved handling and superior load support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Track Bar \u0026amp; Rear Bracket:\u003c\/strong\u003e Keeps axles perfectly centered for optimal alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Forged Track Bar:\u003c\/strong\u003e Crafted from solid steel for exceptional strength and long-lasting durability. Oversized 1.25in Track Bar Diameter: Features OEM-style rubber bushings for a quiet, factory-like ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arm Drop Brackets:\u003c\/strong\u003e Maintain proper suspension geometry by repositioning factory arms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgraded CV Driveshaft Included:\u003c\/strong\u003e Durable design built to handle increased angles and off-road abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Shock Options:\u003c\/strong\u003e Available with premium N3-Series, M1 Monotube, or M1R Monotube Shocks for superior off-road performance, handling, and ride comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 2-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit Rubicon models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671153705073,"sku":"94440","price":1389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_control_arm_drop_m1_kit_drive_shaft_-_62740_94140_94440_94040_91940_90540_65440_69040_7.jpg?v=1791959354"},{"product_id":"rough-country-3-5-inch-lift-kit-adj-lca-fr-d-s-m1-jeep-wrangler-jl-rubicon-18-23-90940","title":"Rough Country 3.5 Inch Lift Kit | Adj LCA | FR D\/S | M1 | Jeep Wrangler JL Rubicon (18-23)","description":"\u003cp\u003eWhen it comes to your two-door Jeep JL, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e Hassle-free setup with no cutting or welding required for a quick and easy upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ground Clearance:\u003c\/strong\u003e Tackle rough terrain with added lift for better obstacle clearance and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake by leveling the front end with the rear for a clean, aggressive stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Engineered to match stock spring rates for confident handling and a smooth, factory-like ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Springs:\u003c\/strong\u003e Delivers predictable handling and improved load support for both daily driving and trail use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Track Bar \u0026amp; Bracket:\u003c\/strong\u003e Heavy-duty construction keeps axles centered and aligned for precise suspension geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Track Bar:\u003c\/strong\u003e Forged solid steel design offers extreme durability and reliability under rugged conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Massive 1.25-inch outer diameter with long-lasting OEM-style rubber bushings for quiet, maintenance-free performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Lower Control Arms:\u003c\/strong\u003e Corrects suspension angles and maintains factory geometry for consistent articulation and ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2023 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 2-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit ONLY fits Rubicon models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671153934449,"sku":"90940","price":1489.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_adj_control_arm_m1_kit_drive_shaft_-_62840_91540_90940_91640_91740_91840_65540_69140_1.jpg?v=1791959356"},{"product_id":"rough-country-3-5-inch-lift-kit-c-a-drop-front-d-s-m1-jeep-wrangler-jl-4wd-24-26-94140","title":"Rough Country 3.5 Inch Lift Kit | C\/A Drop | Front D\/S | M1 | Jeep Wrangler JL 4WD (24-26)","description":"\u003cp\u003eWhen it comes to your two-door Jeep JL Rubicon, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler Rubicon the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Bolt-on design ensures a straightforward install with no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoosted Ground Clearance:\u003c\/strong\u003e Gain the extra height needed to confidently tackle off-road obstacles and rough terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake for a clean, leveled stance that enhances both style and function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Designed to match factory spring rates for superior handling and a smooth, comfortable ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Design:\u003c\/strong\u003e Provides enhanced load support and more consistent handling across varying terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Forged Track Bar System:\u003c\/strong\u003e Includes forged front track bar and rear bracket to keep axles perfectly centered under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Track Bar Construction:\u003c\/strong\u003e Forged solid steel track bar delivers unbeatable strength and long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Features a massive 1.25-inch outer diameter and OEM-style rubber bushings for long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Arm Drop Brackets:\u003c\/strong\u003e Retain proper control arm geometry to preserve factory alignment and ride quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Shock Options:\u003c\/strong\u003e Available with premium N3-Series, M1 Monotube, or M1R Monotube Shocks for superior off-road performance, handling, and ride comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 2-Door models ONLY. Due to variances in coil spring rate this kit ONLY fits Rubicon models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671153967217,"sku":"94140","price":1339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_control_arm_drop_m1_kit_drive_shaft_-_62740_94140_94440_94040_91940_90540_65440_69040_6.jpg?v=1791959358"},{"product_id":"rough-country-6-inch-lift-kit-long-arm-m1r-jeep-wrangler-unlimited-4wd-2018-2023-66044","title":"Rough Country 6 Inch Lift Kit | Long Arm | M1R | Jeep Wrangler Unlimited 4WD (2018-2023)","description":"\u003cp\u003eUnleash Maximum Articulation and Daily Comfort: Push your Jeep JL to the limit with Rough Country's 6-Inch Long Arm Suspension Lift Kit, engineered to dominate the trail without compromising daily drivability. This premium upgrade delivers superior axle flex and off-road articulation while maintaining smooth, stable highway handling, making it perfect for weekend warriors and weekday commuters alike. True 4-Link Design for Serious Off-Roaders: Built around a true 4-link long arm system, this kit ensures optimal suspension geometry and eliminates rear steer for better control and performance. The extended travel arms are crafted to prevent binding, allowing the suspension to flex freely over extreme terrain. No Welding. No Guesswork. Just Bolt and Go: Installation is straightforward, no welding or crossmember removal required. All components are designed for a direct bolt-on fit, saving time while ensuring precision and durability. The kit includes a heavy-duty CV front driveshaft built to handle extreme angles and articulation. Engineered for Strength, Built to Flex: Featuring a full set of adjustable upper and lower control arms front and rear, this kit allows fine-tuning of wheelbase and pinion angles. Each control arm is built from heavy-wall DOM tubing and features Rough Country's adjustable flex joints with rubber bushings for a quiet, durable ride. Dual Rate Coil Springs and Premium Shocks: Custom-tuned dual-rate coils offer excellent handling and a plush ride on or off-road, while the included N3 shock absorbers are valved for both comfort and control. Quick-disconnect sway bar links add even more articulation when you're ready to hit the trail. Rugged Construction Backed by Confidence: All mounting brackets are laser-cut from 1\/4-inch thick high-tensile steel, built to withstand harsh trail conditions. Like all Rough Country suspension systems, this kit is backed by a Limited Lifetime Warranty, giving you long-term confidence with every adventure.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior On \u0026amp; Off-Road Performance:\u003c\/strong\u003e Engineered for incredible ride quality across any terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e No welding required for a hassle-free upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Link Suspension:\u003c\/strong\u003e Longer travel control arms eliminate rear steer and improve articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBinding-Free Articulation:\u003c\/strong\u003e Reduces suspension bind for smoother axle movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Adjustable Track Bar:\u003c\/strong\u003e Forged solid steel construction delivers unmatched strength and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Rate Coil Springs:\u003c\/strong\u003e Maintain ride quality and handling both on-road and off-road.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoosted Ground Clearance:\u003c\/strong\u003e Tackle rough terrain with greater confidence and clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgraded CV Front Driveshaft:\u003c\/strong\u003e Designed for long travel and durability under stress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Disconnect Sway Bar Links:\u003c\/strong\u003e Easily transition from street to trail with added articulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Shock Options:\u003c\/strong\u003e Available with premium N3-Series or M1R Monotube Shocks for superior off-road performance, handling, and ride comfort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Axle Flex:\u003c\/strong\u003e Maximizes suspension travel while maintaining ideal pinion angles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2023 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 4-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 392 models. Due to variances in coil spring rate this kit NOT fit 4xe models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671154065521,"sku":"66044","price":3349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/119-25_jl_6in_long_arm_m1r_lift_-_66044.jpg?v=1791959360"},{"product_id":"rough-country-3-5-inch-lift-kit-adj-lower-fr-d-s-m1-jeep-wrangler-unlimited-24-26-91640","title":"Rough Country 3.5 Inch Lift Kit | Adj Lower | FR D\/S | M1 | Jeep Wrangler Unlimited (24-26)","description":"\u003cp\u003eWhen it comes to your four-door Jeep JL Rubicon, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler Rubicon the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Adjustable Control Arms: The included Rough Country X-Flex Control Arms feature a massive 2.5in diameter body and huge 1.25 threads. The provided X-Flex Joints offer a considerable range, strength, and safety for off-road applications. Boasting an impressive range of motion, Rough Country's upper flex joints pivot 20 degrees, while the lower control arm flex joints are capable of a staggering thirty-five degrees pivot range. Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple Bolt-On Installation:\u003c\/strong\u003e Designed for hassle-free setup with no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoosted Ground Clearance:\u003c\/strong\u003e Tackle off-road terrain and obstacles with ease thanks to added lift height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates the factory rake for a more aggressive, leveled stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Matched Coil Springs:\u003c\/strong\u003e Engineered to match factory spring rates for a smooth, confident ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Rate Coil Springs:\u003c\/strong\u003e Delivers superior handling characteristics and improved load-carrying capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Axle Centering:\u003c\/strong\u003e Forged track bar and rear track bar bracket ensure axles remain properly aligned.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Forged Track Bar:\u003c\/strong\u003e Built from solid steel for extreme strength and long-lasting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Features a 1.25-inch outer diameter with OEM-style rubber bushings for quiet, durable operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Lower Control Arms:\u003c\/strong\u003e Allows optimal geometry retention while accommodating suspension changes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 4-door models ONLY. Due to variances in coil spring rate this kit ONLY fits Rubicon models. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit NOT fit 392 models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671154229361,"sku":"91640","price":1539.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_adj_control_arm_m1_kit_drive_shaft_-_62840_91540_90940_91640_91740_91840_65540_69140_4.jpg?v=1791959363"},{"product_id":"rough-country-3-5-inch-lift-kit-c-a-drop-fr-d-s-m1-jeep-wrangler-unlimited-24-26-91940","title":"Rough Country 3.5 Inch lift Kit | C\/A Drop | FR D\/S | M1 | Jeep Wrangler Unlimited (24-26)","description":"\u003cp\u003eWhen it comes to your four-door Jeep JL Unlimited, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler Unlimited the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHassle-Free Installation:\u003c\/strong\u003e Bolt-on design makes setup simple with no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ground Clearance:\u003c\/strong\u003e Gain extra ride height to conquer tough terrain with confidence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Level Stance:\u003c\/strong\u003e Levels the front with the rear for a clean, aggressive look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Designed with stock spring rates for balanced handling and a smooth, factory-quality ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Performance:\u003c\/strong\u003e Improves handling characteristics and enhances load support for on- and off-road use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Axle Alignment:\u003c\/strong\u003e Forged track bar and rear track bar bracket maintain perfect axle centering under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Strength:\u003c\/strong\u003e Forged solid steel track bar ensures maximum durability and resistance to flex.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Track Bar Design:\u003c\/strong\u003e Features a robust 1.25-inch outer diameter and high-quality OEM-style rubber bushings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Geometry:\u003c\/strong\u003e Control arm drop brackets retain proper suspension angles for improved ride quality and alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Shock Options:\u003c\/strong\u003e Available with premium N3-Series, M1 Monotube, or M1R Monotube Shocks for superior off-road performance, handling, and ride comfort.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 4-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit Rubicon models. Due to variances in coil spring rate this kit NOT fit 392 models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671154622577,"sku":"91940","price":1339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_control_arm_drop_m1_kit_drive_shaft_-_62740_94140_94440_94040_91940_90540_65440_69040_4.jpg?v=1791959365"},{"product_id":"rough-country-3-5-inch-lift-kit-adj-lower-fr-d-s-m1-jeep-wrangler-unlimited-rubicon-18-23-69140","title":"Rough Country 3.5 Inch Lift Kit | Adj Lower | FR D\/S | M1 | Jeep Wrangler Unlimited Rubicon (18-23)","description":"\u003cp\u003eWhen it comes to your four-door Jeep JL, we know you need a lift that won't let you down. Our 3.5 Inch Lift Kit delivers legendary off-road prowess and smooth on-road handling. Increased Ground Clearance: Get ready to conquer those rocky trails and rough terrains like a boss! Our lift kit gives your Jeep Wrangler the extra inches it needs to clear obstacles with ease. Front-to-Rear Leveling: Tired of that nose-down stance? Ditch the unbalanced Jeep life with our leveling kit. We bring symmetry to your ride, lifting the front to match the rear, giving you a smooth and steady journey. Tuned Coil Springs for Superior Performance: Your Jeep's handling and ride quality matter, and we get that. Our coil springs come dialed in with OEM spring rates, delivering top-notch handling and a plush ride. Our linear coil rate springs take it up a notch, ensuring impeccable handling and stability, even when the terrain gets wild. Additional Tire Clearance: Who doesn't want bigger, beefier tires? Our lift kit makes room for larger tires (up to 35 inches), giving your Jeep a more aggressive look that will turn heads on and off the road! Heavy-Duty Track Bar: Our included track bar is an absolute beast, constructed from forged solid steel for unparalleled strength and durability. With its massive 1.25-inch outside diameter and rugged OEM-style rubber bushings, it's built to handle anything the off-road throws its way. Durable CV Driveshaft: The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's extended Front CV Driveshaft eliminates this issue allowing you to flex your suspension with more peace of mind! Easy Installation: We know you'd rather be off-roading than in the garage all day. That's why our lift kit is designed for easy installation, so you can hit the trails in no time.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On Installation:\u003c\/strong\u003e Hassle-free setup with no cutting or welding required for a quick and easy upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Ground Clearance:\u003c\/strong\u003e Tackle rough terrain with added lift for better obstacle clearance and off-road performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Rear Leveling:\u003c\/strong\u003e Eliminates factory rake by leveling the front end with the rear for a clean, aggressive stance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Tuned Coil Springs:\u003c\/strong\u003e Engineered to match stock spring rates for confident handling and a smooth, factory-like ride.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Coil Rate Springs:\u003c\/strong\u003e Delivers predictable handling and improved load support for both daily driving and trail use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Track Bar \u0026amp; Bracket:\u003c\/strong\u003e Heavy-duty construction keeps axles centered and aligned for precise suspension geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Track Bar:\u003c\/strong\u003e Forged solid steel design offers extreme durability and reliability under rugged conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized Track Bar Specs:\u003c\/strong\u003e Massive 1.25-inch outer diameter with long-lasting OEM-style rubber bushings for quiet, maintenance-free performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Lower Control Arms:\u003c\/strong\u003e Corrects suspension angles and maintains factory geometry for consistent articulation and ride quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2019-2023 Jeep Wrangler (4WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Fits 4-door models ONLY. Due to variances in motor weight, this kit does NOT fit models equipped with a 3.0L EcoDiesel V6 motor. Due to variances in coil spring rate this kit NOT fit 392 models. Due to variances in coil spring rate this kit NOT fit 4xe models. Due to variances in coil spring rate this kit ONLY fits Rubicon models.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671154819185,"sku":"69140","price":1439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2018_jl_3_5in_adj_control_arm_m1_kit_drive_shaft_-_62840_91540_90940_91640_91740_91840_65540_69140_2.jpg?v=1791959367"},{"product_id":"rough-country-6-inch-lift-kit-mono-leaf-rear-vertex-v2-chevy-silverado-1500-25-26-111657","title":"Rough Country 6 Inch Lift Kit | Mono Leaf Rear | Vertex\/V2 | Chevy Silverado 1500 (25-26)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671155146865,"sku":"111657","price":2809.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_gm_1500_6in_mono_leaf_v2_vertex_lift_-_111657_2.jpg?v=1791959370"},{"product_id":"rough-country-6-inch-lift-kit-vertex-chevy-silverado-1500-2wd-2025-2026-111450","title":"Rough Country 6 Inch Lift Kit | Vertex | Chevy Silverado 1500 2WD (2025-2026)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671155179633,"sku":"111450","price":3449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_gm_1500_4in_vertex_lift_-_111350_-_111450_1.jpg?v=1791959370"},{"product_id":"rough-country-6-inch-lift-kit-vertex-v2-chevy-silverado-1500-2wd-2025-2026-111457","title":"Rough Country 6 Inch Lift Kit | Vertex\/V2 | Chevy Silverado 1500 2WD (2025-2026)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671155245169,"sku":"111457","price":2809.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_gm_1500_4in_v2_vertex_lift_-_111357_-_111457_1.jpg?v=1791959372"},{"product_id":"rough-country-6-inch-lift-kit-m1-struts-m1-chevy-silverado-1500-2wd-2025-2026-111440","title":"Rough Country 6 Inch Lift Kit | M1 Struts\/M1 | Chevy Silverado 1500 2WD (2025-2026)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671155507313,"sku":"111440","price":2009.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_gm_1500_6in_m1_strut_lift_-_111340_-_111440.jpg?v=1791959373"},{"product_id":"rough-country-6-inch-lift-kit-mono-leaf-rear-chevy-silverado-1500-2wd-2025-2026-111630","title":"Rough Country 6 Inch Lift Kit | Mono Leaf Rear | Chevy Silverado 1500 2WD (2025-2026)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671155540081,"sku":"111630","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_chevy_1500_6in_n3_lift_-_111630.jpg?v=1791959375"},{"product_id":"rough-country-6-inch-lift-kit-mono-leaf-rear-n3-struts-chevy-silverado-1500-25-26-111631","title":"Rough Country 6 Inch Lift Kit | Mono Leaf Rear | N3 Struts | Chevy Silverado 1500 (25-26)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671155736689,"sku":"111631","price":1749.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_gm_1500_6in_n3_strut_mono_leaf_lift_-_111631_1.jpg?v=1791959378"},{"product_id":"rough-country-6-inch-lift-kit-mono-leaf-rear-m1-struts-m1-chevy-silverado-1500-25-26-111640","title":"Rough Country 6 Inch Lift Kit | Mono Leaf Rear | M1 Struts\/M1 | Chevy Silverado 1500 (25-26)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671155966065,"sku":"111640","price":2009.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_gm_1500_6in_mono_leaf_m1_lift_-_111640.jpg?v=1791959378"},{"product_id":"rough-country-6-inch-lift-kit-mono-leaf-rear-diesel-chevy-silverado-1500-2wd-25-26-111630d","title":"Rough Country 6 Inch Lift Kit | Mono Leaf Rear | Diesel | Chevy Silverado 1500 2WD (25-26)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671155998833,"sku":"111630D","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_gmc_1500_diesel_6in_mono_leaf_n3_lift_-_111630d.jpg?v=1791959380"},{"product_id":"rough-country-6-inch-lift-kit-diesel-chevy-silverado-1500-2wd-2025-2026-111430d","title":"Rough Country 6 Inch Lift Kit | Diesel | Chevy Silverado 1500 2WD (2025-2026)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671156195441,"sku":"111430D","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_chevy_1500_diesel_6in_n3_lift_-_111430d.jpg?v=1791959381"},{"product_id":"rough-country-6-inch-lift-kit-chevy-silverado-1500-2wd-2025-2026-111430","title":"Rough Country 6 Inch Lift Kit | Chevy Silverado 1500 2WD (2025-2026)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an optional upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671156457585,"sku":"111430","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_chevy_1500_6in_n3_lift_-_111430_1.jpg?v=1791959382"},{"product_id":"rough-country-6-inch-lift-kit-mono-leaf-rear-vertex-chevy-silverado-1500-2wd-25-26-111650","title":"Rough Country 6 Inch Lift Kit | Mono Leaf Rear | Vertex | Chevy Silverado 1500 2WD (25-26)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671156490353,"sku":"111650","price":3449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_gm_1500_6in_mono_leaf_vertex_lift_-_111650_1.jpg?v=1791959385"},{"product_id":"rough-country-6-inch-lift-kit-n3-struts-chevy-silverado-1500-2wd-2025-2026-111431","title":"Rough Country 6 Inch Lift Kit | N3 Struts | Chevy Silverado 1500 2WD (2025-2026)","description":"\u003cp\u003eExplore New Heights: Chevy's fourth generation Silverado 1500 features an impressive all-new design that's built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country's 6-inch Suspension Lift. Innovative Design and Construction: When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles and drop cross members to reduce control arm angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear blocks, shocks, and u-bolts that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35\" tires without additional modifications. We didn't want to limit you to one standard kit. Rough Country's 6-inch kit is configurable with all the shock options that we offer. This allows you to choose which shock series you want! Ranging from our nitrogen-charged N3 shocks to our Vertex reservoir shocks the power to choose is in your hands. Installation: With minor cutting and a strut compressor required to install, an estimated timeframe of 8-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty: Rough Country's 6\" Suspension Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Stance:\u003c\/strong\u003e Lifts and levels your vehicle from front to rear for a commanding presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Suspension:\u003c\/strong\u003e High-clearance crossmember design maintains ideal suspension geometry for superior handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Durability:\u003c\/strong\u003e Includes heavy-duty cast knuckles built to withstand rugged terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Fitment:\u003c\/strong\u003e Retains stock track width for proper wheel alignment and stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e 100% laser-cut materials using advanced CAD technology for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Heavy-duty fabricated blocks offer superior strength and longevity over cast alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Chevrolet Silverado 1500 (2WD)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Requires cutting and drilling. Does NOT fit models equipped with Adaptive Ride Control available as an option upgrade on High Country models. Tire \u0026amp; Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25\" wheel spacer #1065.\u003c\/p\u003e\u003cp\u003eQuestions about fitment or installation? Call (559) 627-8664 or text (559) 666-1893. We also install at our Visalia, CA shop.\u003c\/p\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":67671156588657,"sku":"111431","price":1749.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0785\/9047\/6401\/files\/2025_2wd_gm_1500_4in_n3_strut_lift_-_111331_-_111431_1.jpg?v=1791959385"}],"url":"https:\/\/pacifictirewheel.com\/collections\/suspension.oembed","provider":"Pacific Tire And Wheel","version":"1.0","type":"link"}